MODEL |
Trim X500 |
MANUFACTURER |
ARK Taiwan |
FUNCTIONS |
Aileron, Elevator, Rudder, Pitch, Motor control |
MAIN ROTOR DIA |
900mm |
LENGTH |
820mm |
FLYING WEIGHT |
1219g |
DRIVE SYSTEM |
TR-5160 outrunner BL motor w. pinion 14T |
RC GEAR |
3* TR-168 servo for swash HiTec HSG-5084G servo for tail Futaba GY240 gyro --> LF-Technik GyroBot 900 SANWA 92674 receiver |
special calmed version of ARK X500 for market in Japan.
ARF with 400mm wooden blades, 1567KV BL motor, 50A ESC and three swash servos.
light in weight.
docile and stable, easy to hover.
not for expert flyers: any aerobatics or 3D are not recommended.
AAAAa (four and a half of five)
almost excellent for beginners or intermediate flyers who wish to enjoy normal cruising flight.
GyroBot 900
In December 1, 2009, I installed a GyroBot 900 3 axis gyro from LF Technik to my X500. I programmed the gyro with Cockpit Programming Box and set "Flybar with/ Beginner mode". Now my X500 hovers as if she is co-axial: very very stable and docile. Great Gyro!
last updated: Dec. 2, 2009