fly with the wind


fly with the wind
osamu sakazaki's RC soaring page

Venus DLG

PRODUCT:

Venus DLG

MANUFACTURER:

Blue Arrow

CONSTRUCTION:

Balsa D-box, balsa rib, film covered wing
film covered balsa fin and stab
glass pod and carbon boom fuse

FUNCTIONS:

Aileron (Flapperon), Rudder, Elevator

WING SPAN:

1230 mm

WING AREA:

14.64dm2

AIRFOIL:

MH 32

FLYING WEIGHT:

219g

RC GEAR:

4* sub-micro servos and rx pre-installed
4.8V350mAh NiMH battery

Review Date:

August 19, 2009

Summary:

RTF DLG. Four servos and rx are installed.

Strengths:

two piece wing and removable stab for ease of transport.
inexpensive.

Weaknesses:

control rods for elevator and rudder are so heavy.
vertical fin is so small that it would be better to replace it with slightly larger one.

Overall rating:

AAAA  (four of five)

Tips:

It is recommended to reinforce around the launch peg with carbon sheet or glass cloth.
I replaced the vertical fin with larger one and made this airplane rudderless.
I also replaced the elevator push rod with 0.6mm music wire and 0.8mm inner dia. polyimide tube.
After repeated trial and error, now I set reverse differential for aileron: up 3mm, down 8mm.



fly with the wind