fly with the wind > Frenzee
PRODUCT: |
Frenzee |
MANUFACTURER: |
Sylvan Aircraft |
CONSTRUCTION: |
EPP foam wing reinforced by cured carbon fiber sheet and covered by colored tape, balsa elevon covered by Oracover, Coroplast winglet |
FUNCTIONS: |
Elevon, Throttle |
WING SPAN: |
686 mm / 27" |
WING AREA: |
11.6 dm2 /180 sq. in. |
FLYING WEIGHT: |
217.5 g / 7.7 oz (w. Thunder Power 2S900) |
RC GEAR: |
JR R610 receiver |
DRIVE SYSTEM |
Custom CDR Billet Bullet Hot Wind Single BL motor GWS 4x4 prop Castle Creations Thunderbird 18 ESC Thunder Power 2S900, 2S1320, 3S700, 3S900 Li-Poly pack |
review date: June 10, 2006
summary:
EPP foam flying wing
high aspect ratio for good gliding and docile cruising flight
factory recommended BL motor and GWS 4x4 prop work well with both 2S and 3S Li-Poly pack: light weight TP2S730 pack for gentle cruising flight at calm conditions, TP2S1320 pack for moderate wind conditions, TP3S910 for high-speed aerobatic flight.
strength:
easy to build
highly crash resistant
wide speed range, stable at gusty or strong wind conditions
inexpensive
weaknesses:
none for the design or flying performance
overall rating:
AAAAA (five of five): My most favorite airplane now
tips:
My elevon control throw is 4mm to 5mm (1/6" to 1/5") up/down at wing tip and I set 50% expo for normal cruising flight.
For precise and solid elevon control, I attached a carbon rod to each kit supplied wire control rod with heat shrink tubing and a few drops of CA to prevent rod bending (especially when servo pushes the rod).
last updated: Nov.15, 2009
fly with the wind >Frenzee