fly with the wind > Carbon Falcon
fly with the wind
osamu's RC flight
PRODUCT: |
Carbon Falcon |
MANUFACTURER: |
Ace Sim RC |
CONSTRUCTION: |
Ripstop nylon sail, carbon frame, spar and control rods |
FUNCTIONS: |
Aileron, Elevator (Warperon/ Elevon) |
WING SPAN: |
1070 mm |
WING AREA: |
23.2 dm2 |
AIRFOIL: |
original (6CC-W4) |
FLYING WEIGHT: |
236 g |
RC GEAR: |
GWS R6N |
DRIVE SYSTEM |
Lens RC 17-T CD-ROM motor (BL, outrunner) Castle Creations Phoenix 10 ESC Thunder Power 2S 1320 Li-Poly battery GWS 8*4 prop |
Review Date:
April 2, 2005
Summary:
easy to control flying-wing without virtical surface at all
the warperon works well
factory recommended BL power system is lightweight and highly efficient
Strengths:
wide speed range
no tip stall tendencies
light, strong and shock proof construction
servos factory pre-installed
no glue or adhesive needed to build
easy to assemble/ disassemble with no special tools
Weaknesses:
none for flying performance but as no protection for underside and the LensRC BL motor easily sucks dirt or sand (see photo above), you should land on grass or catch the airplane.
Overall rating:
AAAA (four of five)
last update: 2010.12.30
fly with the wind > Carbon Falcon